The Product Specification of
The Product Specification of DSR -0743
Product Name: Bluetooth Remote Control
Model Name: DSR-0743
DSR-0743 contains 17 function buttons. The plastic shell is used as the outer frame of the product, which improves the appearance and feel of the product. The buttons are designed with metaldome, 2*AAA battery as the power supply. One white LED for status.
Otherwise, DSR-0743 has some special functions, such as voice recognition, etc.
Smart conference system
1.3 Product feature
Bluetooth key control
Bluetooth voice control
3. Product specification
3.1 RF performance
Main IC: DS090
Processor: ARM Cortex-M0
Storage: 4M embedded flash
Transmission frequency: 2.402 - 2.4835GHz
TX power: 0dBm
Communication rate: 1Mbps
RX sensitivity: -95 dBm
3.2 Electronic performance
Working voltage: 2.2~3.6VDC
Average power consumption：<50uA (keep Bluetooth connected)
<20uA (sleep mode)
Working distance: >10 meters (key function)
>6 meters(voice function)
Built-in battery : 2*AAA
Battery life : ~ 1 year （Depends on the mode of operation）
Antenna: PCB on board
3.3 Basic performance
Operation temperature: -10~50°C
Operation humidity: 5%~85%
Storage temperature: -20~60°C
Storage humidity: 5%~90%
4. Basic function
4.1 Pairing and unpairing
Press and hold the Menu and Home, and keep for 3 seconds, the white LED start to flash and enter the pairing mode for 30s
After paired successfully ,the LED will on for 1s.
The remote control does not actively initiate disconnection and maintains a long connection. When there is pairing information and the Bluetooth connection is disconnected, press any key to send a re-connect broadcast.
4.3 Sleep and wake up
When there is no data interaction, the remote control remains connected and enters the dormant state, and the remote control does not actively enter the disconnected state. Press any key to wake up the remote control. If it is still connected, the Bluetooth code value of the corresponding button will be sent; if it has entered the Bluetooth connection disconnected state, it will enter the reconnect state.
5. Advanced function
5.1 Voice control
In the remote control, the main chip capture the voice data through a high-SNR microphone and noise reduction based on built in codec and then transmits it to the host via Bluetooth. The host decompresses the data and performs ASR (voice recognition).
Through this function, users can control TV/STB and other devices with sound.
Remark 1: The advantage of this product is high SNR MIC + internal Codec noise reduction to ensure the quality of voice data, and the correct rate of voice recognition reaches 98% (5 meters)
Remark 2: High-performance speech library SDK can be provided to facilitate some customized needs of customers.