The Product Specification of
The Product Specification of DSR -0836
Product Name: Bluetooth Remote Control
Model Name: DSR-0836
DSR-0836 contains 39 function buttons. The plastic shell is used as the outer frame of the product, which improves the appearance and feel of the product. The buttons are designed with Silicone buttons,. There are two LEDs to show the RC modes, 2*AA battery as the power supply.
Otherwise, DSR-0836 has some special functions, such as voice recognition, wheel control, air mouse, universal IR control, etc.
Smart conference system
1.3 Product feature
Bluetooth key control
Bluetooth voice control
High-performance air mouse function
4 custom function buttons
Universal IR control
One-click access to youtube, Netflix, Amazon, Google Play, etc.
3. Product specification
3.1 RF performance
Main IC: RTL8762AK
Processor :ARM Cortex-M0
Storage:256KB embedded flash+80KB RAM
Transmission frequency: 2.402 - 2.4835GHz
TX power: 0dBm
Communication rate: 1Mbps
RX sensitivity: -94 dBm
Transmission distance：50 meters （open area, key function）
IR power: middle: >60uW/cm2; 30°angle: >20uW/cm2
3.2 Electronic performance
Working voltage: 2.2~3.6VDC
Average power consumption：<50 uA (keep Bluetooth connected)
<20 uA (sleep mode)
<2 mA (key press or wheel operate)
<10 mA (voice or air mouse function)
Working distance: >10 meters (key function)
>6 meters(voice function)
Built-in battery : 2*AA
Battery life : 1~2 year （Depends on the mode of operation）
Antenna: PCB on board
3.3 Basic performance
Operation temperature: -10~50°C
Operation humidity: 5%~85%
Storage temperature: -20~60°C
Storage humidity: 5%~90%
4. Basic function
4.1 Pairing and unpairing
Press the volume-and then press the voice button, and keep for 3 seconds, the red LED will start to flash and enter the pairing mode for 30s.
The pairing is successful and the red light will be on for 1s.
The remote control does not actively initiate disconnection and maintains a long connection. When there is pairing information and the Bluetooth connection is disconnected, press any key to send a re-connect broadcast.
4.3 Sleep and wake up
When there is no data interaction, the remote control remains connected and enters the dormant state, and the remote control does not actively enter the disconnected state. Press any key to wake up the remote control. If it is still connected, the Bluetooth code value of the corresponding button will be sent; if it has entered the Bluetooth connection disconnected state, it will enter the reconnect state.
5. Advanced function
5.1 Voice control
In the remote control, the main chip capture the voice data through a high-SNR microphone and noise reduction based on built in codec and then transmits it to the host via Bluetooth. The host decompresses the data and performs ASR (voice recognition).
Through this function, users can control TV/STB and other devices with sound.
Remark 1: The advantage of this product is high SNR MIC + internal Codec noise reduction to ensure the quality of voice data, and the correct rate of voice recognition reaches 98% (5 meters)
Remark 2: High-performance speech library SDK can be provided to facilitate some customized needs of customers.
5.2 Air mouse
Built-in high-precision 6-axis gyroscope, after the main chip collects raw sensor data, based on Invensense (TDK) robust Motion engine and firmware algorithms.
The air mouse function is turned on and off using humanized automatic judgment logic. When the remote control is detected to be shaken strongly, the air mouse function is automatically turned on, and the air mouse function is automatically turned off when the remote control is detected not to be shaken within 5 seconds.
Remark 1: The advantage of this product is 1. Eliminate Hand shake 2. Directional compensation 3. Key effects are eliminated
5.3 Universal IR
By cooperating with the far unit device, the infrared device (TV, set-top box, fan, etc.) that needs to be controlled on the far unit device page, after selecting the device brand, the far unit will transmit its corresponding code value to the remote control via Bluetooth ，After the remote control receives the code value, it sends out an IR control signal through its own IR hardware circuit to achieve the function of controlling the infrared device.
If there is an IR database for various devices in the cloud, then various devices can be controlled through the remote control.
6. Unique function
6.1 Wheel control
The product has a high-precision encoder, which can be used for the scroll wheel function. The user can quickly select the page or application to enter through the scroll wheel.