top of page
  • Writer's pictureAdmin

How to Program Universal Remote to Other Devices

Updated: Jun 1, 2018

The ways to Program A universal Remote To A DVD Player.

First, Turn your DVD player off.

Second, press the Mode button on your remote to switch the remote to DVD mode. (your remote may have a row of component buttons at the top labeled DVD. If that is the case, press the button of the device you want to program.

Third, press the Set button on the remote control.

After that, enter the three digit DVD player code listed in your TV’s user manual. If the code is only one or two digits, you must make it into a three digit code by adding zeros before the number. For example, if the code is 3 enter 003.

Then press the Power button on the remote control. At this time, the DVD player should turn on.

At last, set up your universal remote control, press the Mode button on your remote and switch the remote to the appropriate mode or press the appropriate component button (DVD) before you can use it to control your DVD.

437 views1 comment


bottom of page