
The Product Specification of
RC71S
The Product Specification of RC71S
Product Name: Bluetooth Remote Control
Model Name: RC71S
1. Introduction
1.1 Description
RC71S contains 17 function buttons. The use of silicon as the main material of the button area and the aluminum shell as the bottom material of the remote control make the remote control more beautiful and comfortable The buttons are designed with Silicone buttons,. There is one LED to show the RC modes. 3*AAA battery as the power supply.
Otherwise, RC71S has some special functions, such as voice recognition, air mouse, etc.
1.2 Application
-
TV
-
Set box
-
Smart projector
-
Smart conference system
-
TV stick
1.3 Product feature
-
IR control
-
Bluetooth key control
-
Bluetooth voice control
-
High-performance air mouse function
2. Appearance

3. Product specification
3.1 RF performance
Protocol
​Performance
Bluetooth 4.2
-
Main IC: ISD9160
-
Processor: ARM Cortex-M0
-
Transmission frequency: 2.402 - 2.4835GHz
-
TX power: 0dBm
-
Communication rate: 1Mbps
-
RX sensitivity: -94 dBm
-
Transmission distance: 50 meters (open area, key function)
IR
-
Frequency: 38Khz±2%
-
IR power: middle: >60uW/cm2; 30°angle: >20uW/cm2
3.2 Electronic performance
Item
Performance
Electronic
-
Working voltage: 2.2~3.6VDC
-
Average power consumption:<50 uA (keep Bluetooth connected)
<20 uA (sleep mode)
<2 mA (key press or wheel operate)
<10 mA (voice or air mouse function)
-
Working distance: >10 meters (key function)
>6 meters(voice function)
-
Built-in battery : 3*AAA
-
Battery life : 3 years (Depends on the mode of operation)
-
Antenna: PCB on board
3.3 Basic performance
Performance
Item
Basis
-
Operation temperature: -10~50°C
-
Operation humidity: 5%~85%
-
Storage temperature: -20~60°C
-
Storage humidity: 5%~90%
TBD
Certification
4. Basic function
4.1 Pairing and unpairing
-
Press and hold the voice and Hot button for 3 seconds, the red LED will start to flash and enter the pairing mode for 60s.
-
The pairing is successful and the red light will be on for 1s.
4.2 Re-Connect
The remote control does not actively initiate disconnection and maintains a long connection. When there is pairing information and the Bluetooth connection is disconnected, press any key to send a re-connect broadcast.
4.3 Sleep and wake up
When there is no data interaction, the remote control remains connected and enters the dormant state, and the remote control does not actively enter the disconnected state. Press any key to wake up the remote control. If it is still connected, the Bluetooth code value of the corresponding button will be sent; if it has entered the Bluetooth connection disconnected state, it will enter the reconnect state.
5. Advanced function
5.1 Voice control
In the remote control, the main chip capture the voice data through a high-SNR microphone and noise reduction based on built in codec and then transmits it to the host via Bluetooth. The host decompresses the data and performs ASR (voice recognition).
Through this function, users can control TV/STB and other devices with sound.

Remark 1: The advantage of this product is high SNR MIC + internal Codec noise reduction to ensure the quality of voice data, and the correct rate of voice recognition reaches 98% (5 meters)
Remark 2: High-performance speech library SDK can be provided to facilitate some customized needs of customers.
5.2 Air mouse
Built-in high-precision 6-axis gyroscope, after the main chip collects raw sensor data, based on Invensense (TDK) robust Motion engine and firmware algorithms.
The air mouse function is turned on and off using humanized automatic judgment logic. When the remote control is detected to be shaken strongly, the air mouse function is automatically turned on, and the air mouse function is automatically turned off when the remote control is detected not to be shaken within 5 seconds.

Remark 1:
The advantage of this product is
1. Eliminate Hand shake
2. Directional compensation
3. Key effects are eliminated